Ozone and Oxygen concentrator 2 in 1 can be used in Water and Air for disinfection.

-



OZ-10G Specification

OZ-10G Specification

Ozone Output

Adjustable 4.0~10.0 g/h

Ozone concentration

>55 mg/L  at 5.0 L/min gas flow

Gas Flow

Adjustable 0.5 ~5.0L/min

Oxygen Purity

> 90 % +/-3%

Ozone generating method

German corona discharge

Input voltage

220 V AC  50 Hz (60 Hz optional)

Power input

400 W

Operating temperature

-10 deg C ~ +40 deg C

Storage temperature

-20 deg C ~ +70 deg C

Size  L x W x H

368 (L) X 342(W) X 572 (H) mm

Weight

19.5 with package

Comments

Post a Comment

Popular posts from this blog

OX-1A Portable Oxygen Concentrator 1~5L flow adjustable

-
Image
Video:  How to operate OX-1A Portable Oxygen Concentrator Flow Range (lpm)         0.5 -5 LPM  Maximun Flow             5 LPM   Oxygen Purity:                         93%±3%（0.5 ~1LPM）  80%±3%（2LPM）  65%±3%（3LPM）  55%±3%（4LPM）  50%±3%（5LPM）  Output Pressure             58 ± 6 Kpa   Weight                           5.2kg  Dimension(mm)            200 (L) x 230 (W) x 325 (H)  Noise Level                   < 36 db(A)  Electrical Requirement  220V/50Hz, 115V/60Hz, DC12V  Power Consumption      90W（AVER ）  
Read more

Pick up your oxygen concentrator (Venus 5) just a finger

-
Image
You can pick up your oxygen concentrator just a finger. Technical Specification   Oxygen Concentration : 96%~90% at all flow rates,                                             Based on atmospheric of 14.7psia(101 kPa) at 21℃   Power requirements : AC adaptor : 100~240V AC (±10%),50/60Hz in,16.8V DC ,6A out  DC adaptor : 12.0~16.8V DC in,16.8V DC out  Sound Level : 42dBA at setting 2 and 15 BPM (when measured at 1 m from front of device) Alarm type : No breath, low oxygen concentration, high breath rate, technical fault,                      low battery, no flow ,depleted battery, external power failure  Outlet pressure : 8.5±0.5 psi  Operation Temp. /Humidity : 5~35℃ / 5~90%RH Storage Temp. /Humidity : -20~70℃ / 5~95%RH Dimension(mm) 115 (L) x 158 (W) x 255 (H) mm Weight 2.2 kg ( with inter...
Read more

OX-5A 5L PURITY 93%±3%

-
Image
5L Oxygen Concentrator Atomization, Dual Flow, OSD oxygen sensor device (Optional) For Pulmonary Fibrosis patients, COPD. With Wheels easy to carry at home Flow Range (Lpm) : 0.5-5 Lpm Maximum Flow       : 5 Lpm Oxygen Purity        : 93%±3% (87%~95%) Output Pressure     : 58 ± 8 kPa (8.5±0.5PSI) Weight                    : 14.9kg Dimension (mm)     :  368 (L) x342 (W) x 572 (H) Noise Level             : < 40db(A) Electrical Requirement : 115V/60Hz, 220V/50Hz, 60Hz 230V/50Hz, 100V/50Hz,60Hz Power Consumption   :  300W (AVER) OCSI Signal (OPTIONAL) : YELLOW : 82% below,  RED   : 70% below Warranty : 3 years
Read more